Cal-Van in our Tool Box
29 results found
- Brand:
Make Perfect Flares Every Time! Use to make single and double flares The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician- SKU: CV164
- Availability: Out of stock
- SKU: CAL499
- Availability: In stock
- Brand:Quick and easy method to accurately gauge the moisture content of all types of brake fluid *(DOT 3, DOT 4, DOT 5.1) Ideal two-button use, one power button and the other to easily switch fluid types Easy to read LED moisture gauge Measurements can be shown
- SKU: CAL66
- Availability: In stock
- Brand:
- Designed to crimp and release the Deutsch terminals found through various industries.
- For use on Deutsch open and closed barrel terminals, Weather Pack, Metri Pack, and other terminals
- SKU: CAL55000
- Availability: Out of stock
- SKU: CAL86
- GTIN: 00047084000861
- Availability: In stock
- Brand:
- Access electrical circuits from the back side of connectors
- Extended wires make testing connectors more convenient
- Access to check for voltage or amperage while connector is plugged in
- SKU: CAL613
- Availability: In stock
- Brand:The 76 Relay Circuit Pro is a tool that can test an entire circuit from the battery to the component in question as well as determining if the relay itself is functioning properly.
- SKU: CAL76
- Availability: Out of stock
- SKU: CAL113
- Availability: In stock
- Brand:Use this tool to take the pressure off the torsion bar arm and allow for removal of the torsion bar on GM and non-GM vehicles Durable blow-molded case included.
- SKU: CV200
- Availability: In stock
- SKU: CAL450
- Availability: In stock
- Brand:Designed to drastically reduce the amount of time needed to find current in all ATM, ATO, and MAXI type fused circuits
- Audible beep instantly tells you if there is any current in any circuit
- Fuses do not need to be removed to read current, check the entire fuse block quickly
- Easily find the parasitic drain
- Battery operated with an automatic shut-off
- SKU: CAL74
- Availability: In stock
- Brand:Used for removing rounded or stripped fasteners with internal drive heads. Can be used on new screws as well. Reverse twist in the hex key bites into stripped out hex for easy removal. Full range to remove most common sizes 3/8″ DR: 4mm, 5mm, 6mm, and 7mm
- SKU: CAL439
- Availability: Out of stock
