-
WATER PUMP (10)
-
BELT TOOLS (9)
-
SPARK PLUG (23)
-
SPECIALITY MEASURING TOOL (19)
-
$312.58Used for removing and installing the pressure spring for the intermediate levers on BMW N20, N26, N52 and N55 engines.
Only 2 left in stock
Assenmacher BMW Intermediate Spring Tool
$312.58 ASMBMW2755Add to cart
Quick View -
$89.69Used to remove and fit the Balance Shaft. Includes tool for positioning the Balance Shaft when at top dead center (TDC). This is only used to hold the balance shaft. WARNING: REMOVE THIS TOOL BEFORE TIGHTENING THE CRANKSHAFT BOLT (CENTRAL BOLT).
Only 2 left in stock
Assenmacher BMW11720 BMW N20 Balance Shaft Holder
$89.69 ASMBMW11720Add to cart
Quick View -
$362.25Comparable to BMW tool # 2 219 548, 2 212 831, 2 212 830 and 110300
Timing set for BMW N20/N26 2.0L turbo (4-cyl.).
Only 1 left in stock (can be backordered)
ASSENMACHER BMW2026 BMW N20/N26 Timing Set
$362.25 AHBMW2026Add to cart
Quick View -
$378.49:$403.67($25.18)Engine alignment tools for newer BMW (N51/N52) 3.0L (non-turbo) and (N54) 3.0L (twin-turbo). Covers [2006-newer] 1, 3, 5 & X5 Series models. NOTE: For [2011-newer] models with N55 engine, application requires the use of #BMW5585.
Only 2 left in stock
ASSENMACHER BMW3028 BMW N52/N54 Engine Timing Set
$378.49
:AHBMW3028Add to cart$403.67($25.18)Quick View -
$270.59:$288.62($18.03)Used to loosen the seal for removal & installation of new front crank seals on BMW N52 & N54 engines. When used in conjunction with BMW #119235, this set will also work for N55 engines.
Only 1 left in stock
ASSENMACHER BMW5254 BMW Front Crank Seal Tool Set
$270.59
:AHBMW5254Add to cart$288.62($18.03)Quick View -
$65.69:$70.00($4.31)Used in conjunction with #AHBMW3028 timing set found only on [2011-newer] BMW with the N55 engines.
Only 1 left in stock
ASSENMACHER BMW5585 Camshaft Bridge for N55 Engine
$65.69
:ASMBMW5585Add to cart$70.00($4.31)Quick View -
$858.99:$892.22($33.23)- Used to remove the cylinder liners on Caterpillar, Cummins, Detroit Diesel, Mercedes OM460 and Volvo D13 engines.
- Spring loaded arms adjust to fit the liner automatically.
Only 2 left in stock
ASSENMACHER HTLP100 Universal Cylinder Liner Puller
$858.99
:ASMHTLP100Add to cart$892.22($33.23)Quick View -
$465.96:$484.59($18.63)Used for setting engine timing for BMW and Mini new B38, B46, B48 and B58 engines. Comparable to BMW tools #116480, #118580, #119340, #2358122, #2288380, #2360895 and #2365488.
Only 2 left in stock
ASSENMACHER MCB4648 BMW/Mini Engine Timing Set
$465.96
:ASMMCB4648Add to cart$484.59($18.63)Quick View -
$69.28:$92.38($23.10)1″ & 1-1/16″ Oil Pressure Sending Unit Socket Includes a 1″ and 1-1/16″ hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8″. Designed to be used with a 3/8″ drive tool or 1-1/8″ wrencch
Out of stock
Astro 7801 7pc. Sensor & Sending Unit Socket Set
$69.28
:AST7801Read more$92.38($23.10)Quick View -
$69.49:$85.24($15.75)For use crank pulley dampeners without female threaded holes
Heavy duty grade 9 drive bolt (class 12.9)
In stock
Astro 78450 HD Harmonic Crank Pulley Puller
$69.49
:AST78450Add to cart$85.24($15.75)Quick View -
$65.09:$86.73($21.64)Designed for use on harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys Can be used on tapped flywheels of electric or two-cycle motors Heavy duty 4-way slotted yoke 3 – Hardened forcing screws 3-3/4″ & 6-1/2″ long 11 sets of washer
In stock
ASTRO 7846 Harmonic Balancer Puller Set
$65.09
:AST7846Add to cart$86.73($21.64)Quick View -
$37.25:$47.71($10.46)• Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16″ – 2-1/2″ (18mm – 54mm)
• Precision clamp on end of flexible cable allows for extended reach where other models cannot reachIn stock
ASTRO 9409A Hose Clamp Pliers
$37.25
:AST9409AAdd to cart$47.71($10.46)Quick View -
$49.39:$75.16($25.77)• Full magnetic ring for a more securely retained spark plug compared to other magnetic and rubber bushing style sockets
• Universal swivel design for increased access with minimal outside diameter sockets for tight cylinder head clearances
• 3/8” drive 6-point sockets in 9/16” x 6”, 5/8” (16mm) x 6”, 5/8” (16mm) x 10”, and 13/16” x 6”
• For use with most import and domestic vehiclesIn stock
ASTRO 94404 Magnetic Spark Plug Universal Extension Socket Set
$49.39
:AST94404Add to cart$75.16($25.77)Quick View -
$44.19:$50.44($6.25)Pressure regulates shop air to test any cooling system or radiator cap for leaks
Quick connector works on nearly all brands of cooling system testing caps and adapters
Fills even large cooling system almost instantly, and provides constant pressure on leaks to trace their source
Gauge displays the common pressures levels for different cooling systems and regulator will max at 30psi to prevent damage
Only 2 left in stock
ASTRO Universal Air Powered Cooling System Pressure Tester
$44.19
:AST7856Add to cart$50.44($6.25)Quick View -
$44.19:$50.44($6.25)Pressure regulates shop air to test any cooling system or radiator cap for leaks
Quick connector works on nearly all brands of cooling system testing caps and adapters
Fills even large cooling system almost instantly, and provides constant pressure on leaks to trace their sourcIn stock
ASTRO Universal Air Powered Cooling System Pressure Tester
$44.19
:AO7856Add to cart$50.44($6.25)Quick View -
$89.49:$110.27($20.78)For removal and installation of oxygen sensors, oil pressure sending units and vacuum switches Variety of sizes and styles for use on most domestic and imported vehicles Made of high-quality chrome vanadium and chrome moly steel For use with 3/8″ and 1/2″
In stock
ATD 5666 11 Pc. Oxygen Sensor & Sending Unit Socket Set
$89.49
:ATD5666Add to cart$110.27($20.78)Quick View -
$58.39:$115.88($57.49)Measurement Range: -60 to 550°C (-76 to 1022°F) Operating Range: 0 to 50°C (32 to 122°F) Emissivity: 0.95 default – adjustable 0.1 to 1 step .01 Resolution (-9.9 to 199.9°C): 0.1°C/0.1°F, otherwise 1°C/1°F Response Time (90%): 1 sec Distance to Spot: 12:1
In stock
ATD 70001 12:1 Infrared Thermometer
$58.39
:ATD70001Add to cart$115.88($57.49)Quick View -
$15.29:$28.92($13.63)- For the safe removal or installation of engines with or without the transmissions
- The universal design fits most common applications
- 1,000 lbs. Maximum Load Capacity
- Use in conjunction with ATD-7533 Engine Lift Chain
In stock
ATD 7531 Engine Lift Plate
$15.29
:ATD7531Add to cart$28.92($13.63)Quick View -
- Assists in lifting engines and heavy components from chassis
- Securely distributes weight for safe lifting
- 1,000 lbs. Maximum Load Capacity
ATD 7533 1,000 lbs. Engine Lift Chain
ATD7533Read more
Quick View -
$25.09:$41.96($16.87)Ergonomic spring loaded handle remotely activates the belt grabber for belt routing
Fingers easily control the serpentine belt during installation and removal
Works faster and easier than standard belt hook tools
Corrosion resistant steel to promote long life
Only 1 left in stock
ATD 8604 Tru-Grip Serpentine Belt Tool
$25.09
:ATD8604Add to cart$41.96($16.87)Quick View
Loading... All products loaded
