Have a website? Join the Fat Monkey’s affiliate program and earn money!
Abrasive disc used for paint preparation, primer sanding and fine featheredging.
Out of stock
An HVLP gravity pressurized spray gun, to be used with a pressurized H/O cup system to provide superior application of high viscosity coatings. Kit contains 1 each HGP spray gun and 4 atomizing heads – 2 each 1.8mm nozzles and 2 each 2.0mm nozzles.
In stock
3M™ Performance Gravity HVLP Atomizing Heads are designed to deliver premium spray performance for coatings including paints, clear coats and topcoats. Replaceable nozzles are built exclusively for gravity feed applications with the 3M™ Performance Spray Gun System and 3M™ PPS™ Series 2.0 Spray Cup System, offering like-new spray performance with the change of each nozzle.
Quick-change nozzles range from 1.2 to 2.0 for spraying a wide range of industrial and automotive coatings
Like-new spray performance with each new atomizing head
Use exclusively with the 3M™ Performance Spray Gun and 3M™ PPS™ Series 2.0 Spray Cup System
Exceptional pattern control, atomization and transfer efficiency
Nozzle sizes include: 1.2, 1.3, 1.4, 1.6, 1.8, and 2.0
In stock
3M™ Performance Gravity HVLP Atomizing Heads are designed to deliver premium spray performance for coatings including paints, clear coats and topcoats. Replaceable nozzles are built exclusively for gravity feed applications
In stock
3M™ Performance Gravity HVLP Atomizing Heads are designed to deliver premium spray performance for coatings including paints, clear coats and topcoats. Replaceable nozzles are built exclusively for gravity feed applications with the 3M™ Performance
In stock
3M™ Performance Gravity HVLP Atomizing Heads Variety Refill Kit includes nozzles in six sizes ranging from 1.2 to 2.0. Replaceable nozzles are built exclusively for gravity feed applications with the 3M™ Performance Spray Gun System and 3M™ PPS™ S
In stock
3M™ Performance Spray Gun is our first ever spray gun designed specifically to save you time while delivering top-of-the-line performance. Its integrated system includes quick-change replaceable atomizing heads and 3M™ PPS™ Series 2.0 Spray Cups, wh
In stock
The 3M™ Performance Spray Gun was built for the modern painter and gives technicians a smarter way to spray. Made from an advanced impact-resistant composite material, the spray gun is one of the lightest in the industry yet durable enough for the toughest industrial conditions. From the trigger to the body, the spray gun was optimized by kinesiologists to enhance comfort specifically for the high demands of all-day spraying.
In stock
Specifically designed replacement part for 3M™ Performance Spray Gun Durable stainless steel construction resists wear, bending and damage Engineered to provide a leakproof seal when used with 3M™ Performance Spray Gun atomizing heads Controls fluid flow
Only 1 left in stock
Includes everything needed to rebuild, including all fasteners
Refresh trigger pull, needle, fan and fluid control with new springs and seals
Use only with 3M™ Performance Spray Gun
Only 1 left in stock
Our 3M™ Trizact™ Hookit™ Foam Abrasive Disc removes fine sand scratches on painted surfaces to reduce the amount of time spent compounding. Three-dimensional mineral abrasive structures are distributed uniformly across the disc surface and wear evenly for
In stock
Our 3M™ Hookit™ Purple Finishing Film Abrasive Disc 260L features an updated coating that levels surface defects on clear coat and greatly reduces pigtails. Aluminum oxide abrasive cuts fast, lasts a long time, resists loading with or without hole pattern
Out of stock
3M™ Paint and Rust Stripper works quicker, lasts longer and cuts faster than conventional sandpaper to strip away corrosion, scale and old finishes. Made from durable, non-woven synthetic material, our rust and paint remover makes a tough job faster and easier — it cleans away surface corrosion to reveal the surface below. Silicon carbide abrasives fracture easily to expose sharp edges for aggressive grinding that speeds removal of rust and scale. The paint and rust stripper may be used on fiberboard, plastics, wood, clear coat, fiberglass, filler, metal, paint, and putty.
Available on backorder
The 3M™ Roloc™ Green Corps™ Abrasive Disc is a coarse grinding disc for removing paint, rust and welds in collision repair. Its small diameter makes it especially useful in hard-to-reach areas. Convenient Roloc™ attachment securely locks the disc in place
Out of stock
Specially designed medium cutting, liquid compound for removing 1200, 1500, and 2000 color sanding scratches in automotive paints including clear coats.
In stock
For scuffing before applying paint and primer-surfacer
Also used for used car reconditioning, cleaning upholstery, headlines, and door pads, and chrome and white wall tires
Rinses clean and does not rust
Can be used over and over again
In stock
All products loaded