OTC
FilterShowing 1–20 of 80 results
-
$1,369.19:$1,749.99A high-lift transmission jack with universal saddle and adjustable corner brackets and safety chains for optimum positioning of the load. The head tilts front to back and side to side to make removal and installation of transmission and driveline components easier.
Only 2 left in stock
OTC 1,000-lb Capacity High-lift Transmission Jack
$1,369.19
:OTCTJH10 Add to cart$1,749.99Quick View -
$33.19:$44.94Loosens hard-to-turn screws, bolts or nuts. Handle design prevents possibility of hitting hand with hammer when striking impact driver.
Out of stock
OTC 1/2″ Impact Driver
$33.19:OTC4607 Read more$44.94Quick View -
$529.49:$792.44Industry standard couplers are interchangeable with leading manufacturer’s units. Single-speed hydraulic hand pump and ram with 6″ stroke. Snap together design of extension tubes allows for easy assembly. Sturdy extension tubes hold up in even the toughes
In stock
OTC 10-Ton collision repair set
$529.49:OTC1515B Add to cart$792.44Quick View -
$167.49:$225.61Lifetime Marathon Warranty – you break it (good luck!), we replace it, no question Indestructible handle never needs replacement, outlast wood and and fiberglass handle hammers by well over 30,000 strikes!
Available on backorder
OTC 10Lb. 30″ Double Face Sledge Hammer Indestructible Handle
$167.49:OTC5790ID-1030 Add to cart$225.61Quick View -
$55.89:$90.23Features “knife-like” edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment’s outer edge; when used with a Push-Puller, puller legs are threaded into the attachment’s two tapped holes.
Out of stock
OTC 1122 Bearing Pulling Attachment
$55.89:OTC1122 Read more$90.23Quick View -
$95.79:$154.71Features “knife-like” edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment’s outer edge; when used with a Push-Puller, puller legs are threaded into the attachment’s two tapped holes.
Available on backorder
OTC 1123 Bearing Splitter
$95.79:OTC1123 Add to cart$154.71Quick View -
$977.29:$1,241.79Features “knife-like” edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment’s outer edge; when used with a Push-Pulle
Only 2 left in stock
OTC 1127 13-3/8" Bearing Splitter
$977.29:OTC1127 Add to cart$1,241.79Quick View -
$510.59:$825.36This combo pack contains four of OTC’s most popular bearing splitters, plus a pulley pulling attachment. A rugged organizer case is included, enabling you to keep the tools together for instant use.
Out of stock
OTC 1183 Bearing Splitter Combo Set
$510.59:OTC1183 Read more$825.36Quick View -
$179.99:
$242.77Lifetime Marathon Warranty – you break it (good luck!), we replace it, no question Indestructible handle never needs replacement, outlast wood and and fiberglass handle hammers by well over 30,000 strikes!
Available on backorder
OTC 12Lb. 30″ Double Face Sledge Hammer Indestructible Handle
$179.99:OTC5790ID-1230 Add to cart$242.77Quick View -
$182.49:$244.59Lifetime Marathon Warranty – you break it (good luck!), we replace it, no question Indestructible handle never needs replacement, outlast wood and and fiberglass handle hammers by well over 30,000 strikes!
Available on backorder
OTC 14Lb. 30″ Double Face Sledge Hammer Indestructible Handle
$182.49:OTC5790ID-1430 Add to cart$244.59Quick View -
$3,176.69This versatile air-powered lift includes an integrated pin type stand feature and has a wide lifting height range as well as an adjustable angle handle and the peace of mind provided by the OTC Lifetime Warranty. Its wheels allow for easy mobility to get
Only 1 left in stock
OTC 1591B 10-Ton Combination Air Lift & Stand
$3,176.69 OTC1591B Add to cartQuick View -
$286.29:$462.70700 lb. capacity Cutting edge, design self-centers load to prevent tipping on inclined surfaces. Smooth sliding legs adjust easily to different vehicle widths. PVC-coated support legs don’t scratch vehicle surfaces. “Quick Connect” third-point bar makes
Only 1 left in stock
OTC 1725 Engine Support Bar (3-Point)
$286.29:OTC1725 Add to cart$462.70Quick View -
$1,866.09:$1,978.43Handles a wide variety of engines, transmissions, torque converters, and rear axles from trucks, tractors, and construction machinery. The 50:1 ratio gearbox allows full rotation of mounted unit with just a turn of the crank and locks in position. Easily
Only 1 left in stock
OTC 1735B 2,000 lb. Capacity Heavy-Duty Motor-Rotor® Repair Stand
$1,866.09:OTC1735B Add to cart$1,978.43Quick View -
$6,726.99:$10,581.6796 to 1 ratio worm and gear set rotates components a full 360°; handle locks in any position. Includes 205061 universal mounting plate for use with individual engine adapter plates.
Available on backorder
OTC 1750A 6000 lb. Revolver Diesel Engine Stand
$6,726.99:OTC1750A Add to cart$10,581.67Quick View -
$5,248.79:$7,967.99• Tough, economical press is ideal for pressing rear axle bearings, piston pins, and much more.
• Large 30″ x 46″ work area under ram makes positioning of even bulky work easy. Press bed is easily raised and lowered by a dependable lifting mechanism.
• Press complete with No. 4012A hydraulic hand pump; No. 9652 gauge; No. 24815 tee; No. 9767 hose (1/4″ ID x 6′); hydraulic ram No. 51426 with 6-1/4″ stroke; and 42733-WH2 pump mounting bracket.
Only 1 left in stock
OTC 1833 25-Ton Shop Press
$5,248.79:OTC1833 Add to cart$7,967.99Quick View -
$59.99:$81.16Lifetime Marathon Warranty – you break it (good luck!), we replace it, no question&return&&newline&Indestructible handle never needs replacement, outlast wood and and fiberglass handle hammers by well over 30,000 strikes!&return&&newline&Ergonomic rubber grip handle reinforced with st
Available on backorder
OTC 2.5lb 12″ Club Hammer Industructible Handle
$59.99:OTC5791id-312 Add to cart$81.16Quick View -
$262.19:$423.77S022 is a pair of 22 Ton capacity pin style stands. The fully steel construction consists of a large, 11” flat square base welded to a square tube and steel support column. Rated to safely hold 44,000 lbs., the flat base resists sinking into concrete, asphalt and other soft surfaces. A single pin-style adjustment holds the support column in place with 3 height adjustment positions. A braided steel cable secures the extra-large pin to the jack, preventing it from being lost or misplaced.
Only 1 left in stock
OTC 22 Ton Jack Stands
$262.19:OTCS022 Add to cart$423.77Quick View -
$137.49Live Data with color screen tool. Updated with 2013 model year coverage. Record and playback Live Data. Monitor battery, alternator, and charging systems. AutoID upon plugging the tool in will automatically populate vehicle data for most 2000 and newer ve
Out of stock
OTC 3209 OBD II, ABS and Airbag Scan Tool
$137.49 OTC3209 Read moreQuick View -
$311.79:$503.94BREAK OUT THE BOX Connect, detect, monitor voltage and more. Use this tool for diagnosing electrical faults and CAN bus line activity. Check power and ground circuits, check active protocol lines, or connect a multimeter or oscilloscope for detailed signa
Only 1 left in stock
OTC 3415 CAN Test Box
$311.79:OTC3415 Add to cart$503.94Quick View -
$169.99:$229.34OTC AMP Clamp/Multimeter was designed to allow accurate current measurements using clamp jaws. The clamp meter is well suited for testing starting/ charging circuits, and provides easy access to current, voltage and other key automotive measurements, all
Only 2 left in stock
OTC 3908 AMP Clamp/Multimeter
$169.99:OTC3908 Add to cart$229.34Quick View
