DRILL BITS & ACCESSORIES in our Tool Box
62 results found
- Brand:
Sizes: Fractions 1/16" through 1/2" by 64ths - Letters A through Z - Numbers 1 through 60 Premium grade KnKut Drills are manufactured from a high grade Molybdendum high speed steel, that has high vanadium content. KnKut Performance Drills- SKU: KNK115KK5
- Availability: On backorder
- Brand:
When access is limited or obstructed either by a structural member or other component, we have a solution. DF-1600K The Extender is a spot weld drill bit extension that adds 6" inches of length, letting you get to those deep and hard to reach spot welds.- SKU: DTFDF-1600K
- Availability: On backorder
- Brand:
• Packaged in convenient see-through pouch of 12 • 135 degree split point • Sturdy double end allows twice the usage • Ideal for auto body work- SKU: AST9012
- Availability: In stock
- SKU: DTFDF-1680T
- Availability: In stock
- SKU: AST2181
- GTIN: 00745227002726
- Availability: In stock
- Brand:The DF-1480 bit is DentFix's 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt (HSCO) spot-weld bit. The twist is the same size as the shank which is also 8.0mm and has a flat spot on it to be tightened into our DF-15DX Series Spot Weld Drills.
- SKU: DTFDF-1480
- Availability: In stock
- Brand:KnKut left hand hard steel drill bits are carbide tipped and made for use in drilling hardened steel in the range of 48 to 65 Rockwell "C".
- SKU: KNK5KK9-LH
- Availability: On backorder
- Brand:The DF-1610TC Titanium Carbo Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10mm and the shank is 8.0mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld
- SKU: DTFDF-1610TC
- Availability: Out of stock
- SKU: DTFDF-1610T
- Availability: In stock
- Brand:Premium grade KnKut Drills are manufactured from a high grade Molybdendum high speed steel, that has high vanadium content.
- SKU: KNKKK5-11/32
- Availability: In stock
- KnKut USA Made Step Point drill bits combine a split tip point with a step drill design for accurate starting without the need of a center punch. This distinctive design reduces heat to increase the tool life of the drill bit and can be used to enlarge existing holes without damaging the drill bit point. The shorter Mechanics Length gives you a sturdier drill bit with 3-Flats on the shanks, sizes 3/16" and above, to help eliminate slippage in your chuck. Our KnKut Step Point Drill Bit is great for hard steel, brass, sheet metal and acrylics.
- SKU: KNK29KK10
- Availability: In stock
- SKU: AST9448
- GTIN: 00745227003013
- Availability: In stock
